🔍 Click to zoom

Aluminium Bending Piece

In Stock

The ETCO truss hinge section, also known as an aluminium bending piece, is a pivot tower piece for lifting truss towers safely. Its top box swings on strong pins, so you can build the tower on the ground and then raise it upright. Once it stands, you lock it with bolts and it works like a normal straight piece. It is available across Pakistan.

✅ Pivoting top box for tower lifting
✅ Build on the ground, raise with less risk
✅ Locks straight with bolts after lifting
✅ Bolt-plate ends for square truss
✅ Strong, light and rust-free aluminium
✅ Supply across Pakistan from Lahore

Technical Parameters (size confirm karke bharein)
Parameter Value
Product Type Truss hinge section / aluminium bending piece
Material High-grade aluminium alloy
Section Size e.g. 290 × 290 / 300 × 300 / 400 × 400 mm – confirm karein
Base Height e.g. 0.5m / 1m – confirm karein
Hinge Steel pins with locking bolts
Connection Bolt plate (4 holes)
Finish Natural silver, rust-free
Compatible With Square bolt truss of the same size
Application Truss towers, stage roofs, goal posts, LED screen supports

PKR 46,000

Buy Now

Key Features

✓truss hinge section, aluminium bending piece, bending piece truss, bending piece price in Pakistan, truss hinge, truss hinge block, hinge truss, tower hinge, truss tower hinge, hinge section price in Pakistan, aluminium hinge truss, bolt truss hinge, ground support hinge, truss tower lifting, stage roof hinge, truss tower parts, truss accessories Pakistan, truss parts Pakistan, stage truss tower, goal post truss tower, LED screen truss tower, truss hinge Lahore, binding piece Lahore, truss hinge Karachi, truss hinge Islamabad, truss ka hinge, tower ka binding piece, ETCO binding piece

The truss hinge section from ETCO, also known as an aluminium bending piece, is a special part for building and lifting truss towers. It has a short tower base and a top box that swings on strong pins. Because of this pivot, crews can join the tower to the roof truss on the ground and then raise it upright. As a result, ground support systems go up faster and with much less risk.

Moreover, the joint lets the tower tilt during the lift, so the load moves smoothly without bending the main tubes. Once the tower stands upright, you lock the top box with bolts and it works like a normal straight piece. The high-grade alloy is also strong, light and rust-free. Therefore, it suits stage roofs, goal posts, LED screen supports and big concert rigs.

Furthermore, the bolt-plate ends connect to standard square bolt truss of the same size. We supply truss parts across Pakistan from our base in Lahore.

What is a truss hinge section?
It is a tower piece with a pivoting top that lets a truss tower tilt while you raise it. Many teams in Pakistan call it an aluminium bending piece.

Why do I need a hinge in a truss tower?
A tower lies flat while you build it, so it needs a pivot point to stand up. Therefore, the hinge allows a safe lift with a chain hoist or a winch, without a crane.

Will it fit my truss?
It fits square bolt truss with the same section size and hole pattern. However, please check your truss size with our team before you order.

What is the price of a truss hinge section in Pakistan?
The price depends on the section size and the quantity. Please contact ETCO on WhatsApp for the latest rate.

Is it safe for heavy roofs?
Yes, when you use it within its load limit and with proper bolts. Always ask a trained rigger to plan the lift and use safety cables at every stage.

No technical parameters added for this product yet.