Introducing the ETCO Beam 230W LCD Display Control Board, the replacement display and menu board for 230W 7R moving head beam lights in Pakistan. It lets you set the DMX address, choose operating modes, and adjust fixture settings from the LCD screen. If your beam light's display is blank, broken, or its buttons stopped working, this board brings full control back.
✅ Replacement LCD board for 230W 7R beam lights
✅ Clear LCD screen for easy menu navigation
✅ DMX address setting from the display
✅ DMX, auto, sound active, and master/slave modes
✅ Menu, Up, Down, and Enter buttons on board
✅ Plug-and-play connectors for quick installation
Technical Parameters
Product: Beam 230W LCD Display Control Board
Compatible Fixture: 230W 7R moving head beam lights
Display: LCD digital display
Functions: DMX addressing, mode selection, fixture setup
Protocol: DMX512 compatible
Operating Modes: DMX, Auto Run, Sound Active, Master/Slave
Buttons: Menu (ESC), Down, Up, Enter
Indicators: Status LEDs
Power: Low-voltage DC from the main control board
Connectors: Multi-pin signal and power connectors
Installation: Plug-and-play replacement
Operating Temperature: –20°C to +50°C
The ETCO 230W beam display board is the control panel of a 230W 7R moving head beam light. Through this LCD screen and its buttons, you set the DMX address, choose the operating mode, and adjust fixture settings. When the board fails, the screen goes blank or the buttons stop responding. You then can’t address the light or change its mode.
Technicians and rental companies use this board to repair beam lights with broken screens, dead buttons, or menu faults. The plug-and-play connectors attach directly to the fixture’s main board, so you can swap it in minutes. Once it’s installed, you can set the DMX address again and link the light to your console. It suits fixtures like our 230W beam moving head light. If the fixture still won’t move after the swap, also check our 380W beam control card range.
Keeping a spare display board saves time on busy event days. Repair shops in Lahore, Karachi, and Islamabad keep it in stock for quick fixes. ETCO Sound & Light supplies genuine spare parts and delivers nationwide.
What is a 230W beam display board?
It is the LCD menu board on a 230W beam moving head. You use it to set the DMX address, modes, and settings.
How do I know the display board is faulty?
Common signs are a blank screen, missing characters, or buttons that don’t respond. Check the ribbon cable connection first, though.
Will it fit my beam light?
It fits most 230W 7R beam lights with this board layout. Compare the connectors and board size with your old board before you order.
What is the price of a 230W beam display board in Pakistan?
The price depends on quantity. Contact ETCO Sound & Light on WhatsApp for the latest rates. We also offer bulk prices for repair shops.
Where can I buy it in Pakistan?
You can buy it from ETCO Sound & Light in Lahore, and we deliver across Pakistan.
No technical parameters added for this product yet.
Spare Parts
Introducing the ETCO DMX Mini Pearl 1024B Control Card, the main processor…
Spare Parts
Introducing the ETCO 4 Eyes COB Blinder Chip, a 100W dual colour…
Spare Parts
Introducing the ETCO PAR 54 Control Card with Blue LCD, a replacement…
Spare Parts
The ETCO 12V fan for PAR light is a 120mm brushless DC…
