Introducing the ETCO 10 Head Ultrasonic Mist Maker, a 48V stainless steel fogger for water low fog machines, fountains, and humidifiers in Pakistan. Its 10 ceramic ultrasonic discs turn water into thick, cool mist without heat or chemicals. Plus, a built-in water level sensor switches it off automatically when the water runs low.
✅ 10 ultrasonic heads for high-density mist
✅ Mist output of about 4–6 kg per hour
✅ 48V DC operation, about 250–300W
✅ Corrosion-resistant stainless steel body
✅ Auto shut-off with water level sensor
✅ For low fog machines, fountains, gardens, and humidifiers
Technical Parameters
Product: 10 Head Ultrasonic Mist Maker
Working Type: Ultrasonic atomization (low fog / mist)
Number of Heads: 10 ceramic ultrasonic discs
Rated Voltage: 48V DC (external power supply)
Rated Power: Approx. 250–300W
Mist Output: Approx. 4–6 kg/h (depends on conditions)
Frequency: About 1.7 MHz per transducer
Water Level Sensor: Built-in auto shut-off
Body: Stainless steel (corrosion-resistant)
Cable Length: Approx. 1–1.5 m (sealed cable)
Service Life: 3,000–5,000 hours (depends on water quality)
Working Temperature: +5°C to +50°C
The ETCO 10 head ultrasonic mist maker turns plain water into thick, cool mist for many uses in Pakistan. First, its 10 ceramic discs vibrate at high frequency to break water into fine droplets. As a result, you get dense, low-lying mist without heat or fog fluid. However, after long use the discs wear out, so the mist becomes weak.
Event companies use it inside water low fog machines for couple entries and first dances. In addition, it works for fountains, gardens, ponds, greenhouses, and mushroom farms. Moreover, the stainless steel body resists rust, and the sensor protects it from running dry. For example, it suits our low fog machine. Also, keep a spare 3000W fog machine heater for heater-based units. Therefore, buyers in Lahore, Karachi, and Islamabad keep it in stock. Finally, ETCO Sound & Light delivers nationwide.
What is a 10 head ultrasonic mist maker?
It is a device with 10 ultrasonic discs that turns water into fine mist. It is used in low fog machines and humidifiers.
Does it need a separate power supply?
Yes. It runs on 48V DC, so connect it to a matching 48V power supply. Never connect it to 220V directly.
What water should I use?
Use clean, filtered water. So, mineral deposits build up slower and the discs last longer.
What is the price of a 10 head ultrasonic mist maker in Pakistan?
The price depends on quantity. So, contact ETCO Sound & Light on WhatsApp for the latest rates.
Where can I buy it in Pakistan?
You can buy it from ETCO Sound & Light in Lahore. Moreover, we deliver across Pakistan.
No technical parameters added for this product yet.
Spare Parts
Introducing the ETCO PAR 54 Control Card with Blue LCD, a replacement…
Spare Parts
Introducing the ETCO Water Low Fog Heater, a 3000W replacement heating core…
Spare Parts
Introducing the ETCO Fog Heater 3000W, a replacement heating core for 3000W…
Spare Parts
Introducing the ETCO Beam 380W LCD Display Control Board, the replacement display…
